SATA Drive to 40-Pin IDE Converter Mini Block
Add this converter box to your IDE Forensic Hardware so that you can read Native SATA drives as well.

SATA IDE ADAPTER CAN BE USED WITH U2-ATAWP01
SATA to IDE Serial to parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 CSP300 converter supports a 1.5GHz data rate. which could drive ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc.
Dimension : 56 * 40 * 12.2 (mm)
Weight : 19g
With LED Indicated power
Serial ATA 1.0 Specification compliant
Automatic Serial ATA 1.5 Gbps speed negotiation
ATA / ATAPI PIO mode 0 to 4
ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission
Support Spread Spectrum Clocking to reduce EMI
Support Partial/Slumber power management
Provide adjustable TX signal amplitude and pre-emphasis level
Slave Disk support